Mitsubishi 800 Series User Manual page 4

r
ACAUTION
0 Use the GOT in the environment given in the general specifications of the GOT User's Manual.
Using the GOT wtside the range of the general specifications may result in
electric
shock, fire or
malfunctioning, or may damage or degrade the module.
0 Tighten the attachment screws for installing the GOT main module to the base within the range
o f
specified toque.
If the attachment screws are loose, it may result in fallout, short circuits,
o r
malfunctions.
Tightening the attachment screwes too far may cause
damages to the screws and/or the module,
resulting in fallout, short circuits, or malfunctions.
0 When using a bus connection, bus connection cables should be
securely connected to the con-
nectors of the bus connection module, bus connector conversion module, and base unit. After
connecting the connector, check to make sure they are securely tightened and not loose. Defec-
tive contact could cause a false input and output.
0 The communication cable should be connected securely to the connector on the communica-
tions module and PC CPU side. After connecting the connector, check to make sure they are
securely tightened and not loose. Defective contact could cause a false input and output.
0 When the power supply module, communication module, bus connection module, and the
op-
tional module are installed to the GOT main module, attach them to the GOT attachment part by
aligning to the screw guide, then tighten the module fixed screws within the range of specified
torque.
If the module fixed screws are loose, it may result in fallout, short circuits, or matfunctions.
Tightening the module fixed screws too far may cause damages to the screws and/or the mod-
ule, resulting in fallout, short circuits, or malfunctions.
0 Make sure the memory cassette and memory card are installed securely in their connector. After
connecting the connector, check to make sure they are securely tightened and not loose. Defec-
tive contact coule cause malfunctions.
WIRING PRECAUTIONS]
0 Make sure to switch all phases of the external GOT'S power supply off before beging wiring work.
If you do not switcn off the external power supply, it will cause electric shock, malfunction, or
damage to the module.