Mitsubishi 800 Series User Manual page 59

2 . System
Configuration MELSEC GOT
2.1 1.3 About the connection cables
(1) When connecting the DTR
The connection diagram of the cables for the host and GOT when connecting the DTR
signals, and the connectors used are shown below.
(a) Connection diagram
DSR signal
....
When the signal is off, the send is not performed from the GOT to the
host. Normally, send signals from the host so that the DSR is always
turned on.
DTR signal
....
The signal turns on when the GOT can receive data.
(b) Connector and connector cover
GOT side connector
Name Manufacturer Model
Connector cover
Hirosd E k t r i c Co., Ltd. sc-1620
Housing
P1620A-CA (20)
, Contact
SC-I 600- 1 1
Host side connector
Use the connector compatible with the host used.
2
-
31