Mitsubishi 800 Series User Manual page 101

7. Operating Utility functions
MELSEC GOT
7.6 Copying Monitor
Data
Between the Internal Memory and Memory
Card
(Screen Copy)
When the alarm history function data is stored in the memory card that uses this function the
screen data copied using the screen copy function is deleted. Use separate memory cards of the
memory cards for the screen copy function and the alarm history function.
a
Display screen
Example of screen
--I
DATE COW
INNER MEMORY
C
MEMORY CARD
T
4
SEL.
+ I COPY
I I I
I
- '
Functions
Project data can be backed up from the internal memory to a memory card.
Project data backed up from the memory card to the internal memory can be copied.
Ish
Operations
(a) Basic operations
Items are selected by touching the and
I I )
keys.
Touching the
[JI
key displays the message "OK to execute?".
To execute the function, touch the key once again. To select an item, use the
and keys. To interrupt a function, touch the key. However, please be
aware that this returns to the utility menu screen.
(b) Returning to the utility menu screen
Touching the returns to the utility menu screen.
a
Error messages displayed in response to operations
Message
Corrective Action
CeuSe
write protect functi o n
specified on the memory card. memory card.
The write protect function has been Cancel the write protect function on the
Install memory card
F m a t memory card
No memory card has been installed in
,nstall a memory card in the GOT,
the GOT.
The memory card installed in the GOT Format the memory card.
(See
Section
has not been formatted.
The amount of space available on the
8.4.)
rnemorv.
which has sufticient space available. is less than the c
of
the internal
Replace the memory card with one memory card whic has been installed
Insufficient memory on card
Memory card error
There
is
a hardware problem with the
memory card which has been installed.
Replace the memory card.
7 - 6