CyberData InformaCast Enabled 011406 Operation Manual page 88

Web Page Item
Fast Blink
Color
Brightness
Red
Green
Blue
Operations Guide
Table 2-21. Sensor Page Parameters (continued)
Description
Strobe will blink ON at the specified brightness then OFF five
times per second during the duration of the event.
Select desired color (only one may be chosen).
How bright the strobe will blink when the sensor is triggered. This
is the maximum brightness for "fade" type scenes.
The red LED value for Sensor.
The green LED value for Sensor.
The blue LED value for Sensor.
Click the Test Sensor button to test the sensor.
Use this button to preview the strobe flashing behavior for the
Sensor Strobe Settings.
Click the Save button to save your configuration settings.
Note: You need to reboot for changes to take effect.
Click on the Reboot button to reboot the system.
Click on the Toggle Help button to see a short description of
some of the web page items. First click on the Toggle Help
button, and you will see a question mark (
some of the web page items. Move the mouse pointer to hover
over a question mark to see a short description of a specific web
page item.
931281I
) appear next to
CyberData Corporation