Installation Guide for RFU-D-HP
7
RFU-C
2
RFU-C-POLEMOUNT
POLE
MOUNT
KIT
Required Tools
•
Metric offset hexagon key set
•
Metric wrench key set
•
Phillips #1, #2 screwdriver
Procedure
1
Mount and tighten the RFU-D-HP Remote Mount Adaptor plate (supplied in the RFU-D-HP Adaptor
Remote Mount kit) to the RFU-D-HP Pole Mount using the four flat screws supplied with the RFU-D-HP
Adaptor Remote Mount kit.
2
Mount and tighten the RFU-D-HP Splitter to the RFU-D-HP Pole Mount using the four captive screws and
washers that are assembled to the RFU-D-HP Splitter kit.
Page 96 of 179