Installation Guide for RFU-D-HP
Important:
Verify that the O-ring is properly mounted between the antenna transition and the
OMT.
OMT
O-Ring
2
Connect the RFU-D-HP Dual Splitter or Dual Circulator kit to the OMT using four M8 screws and
washers, supplied in the Dual Coupler, and tighten the screws.
Important:
Verify that the O-rings on the OMT are properly mounted between the OMT ports and the Dual
Splitter/Dual Circulator.
O-Rings
(OMT)
Page 104 of 179