Installation Guide for RFU-D-HP
Location
Pin
Location Pin
(Not Shown)
7
Repeat steps 4-6 to attach the second Diplexer unit and the second Radio unit to the other side of the
Dual Splitter or Dual Circulator.
8
Repeat steps 1-7 to attach the Slave RFUs to the Diversity antenna.
9
For each Master-Slave RFU pair:
a) Connect the source sharing cable between both EXT REF RFU-D-HP radio connectors. The maximum
torque for connecting this cable to the radio is 5Lb.in (0.5N.m).
Location Pin Hole
(Not Shown)
8 M5 Captive
Page 107 of 179
Location
Pin Hole
Screws