Cambium Networks PTP 820 Series Installation Manual page 45

System release 10.9
Hide thumbs Also See for PTP 820 Series:
Table of Contents

Advertisement

Installation Guide for RFU-D-HP
5
Optionally, after securing the cable into the body of the gland, you can close the other side of the gland
with an M28 gland cap. The gland cap protects the cable and connector from damage when elevating
the cable and gland to the radio unit.
6
The M28 gland cap has a hook on top. After attaching the gland cap to the gland, you can connect a
rope to the hook and use this to lift the gland and cable up to the radio unit. Before screwing the gland
into the radio unit, you must remove the gland cap.
7
If you used an M28 gland cap to close the gland when raising the gland and cable to the radio unit,
remove the gland cap from the gland at this point by unscrewing the cap.
8
Connect the cable to the port.
9
Screw the gland into the radio unit until there is full contact between the gland and the radio unit.
Page 45 of 179

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rfu-d-hp series

Table of Contents