Cambium Networks PTP 820 Series Installation Manual page 111

Installation Guide for RFU-D-HP
3
Connect the RFU-D-HP Dual Coupler or Dual Splitter kit to the OMT/Splitter using four M8 screws and
washers, supplied in the Dual Coupler, and tighten the screws.
Note:
Verify that the O-rings on the OMT or Splitter are properly mounted between the OMT/Splitter ports
and the Dual Coupler/Dual Splitter.
O-Rings
(OMT/Spitter)
Page 111 of 179