Installation Guide for RFU-D-HP
3
6 GHz: Washer, Helical spring lock, SS, ANSI,
#10
7-11GHz: Washer, Helical spring lock,SS,ANSI,#8
4
6GHz: Washer, Plain, SS, DIN 125-A5.3-A2-70
7-11GHz: Washer, Plain, SS DIN 125-A4.3-A2-70
5
Sealing Gasket
Required Tools
•
Imperial Allen key set
Required Torque
•
#8-32 socket hex screws – 2 Nm
•
#10-32 socket hex screws – 3.2 Nm
Procedure
A Remote Mount Splitter or Remote Mount Coupler is attached to the OCU using the 8 screws, helical spring washers,
and plain washers provided with the Coupler or Splitter kit, as shown in the figure below. The other interfaces can be
connected to the antenna or flexible waveguide, depending on the configuration.
8 Per Kit
8 Per Kit
1 Per Kit
Page 142 of 179
Included in Splitter/Coupler Kit
Included in Splitter/Coupler Kit
Included in Splitter/Coupler Kit