Cambium Networks PTP 820 Series Installation Manual page 87

Installation Guide for RFU-D-HP
8 Mount and tighten the RFU-D-HP Dual Coupler to the RFU-D-HP Pole Mount using the four screws and washers that
are supplied with the RFU-D-HP Dual Coupler kit. Pay attention that the O-rings are mounted on the RFU-D-HP
Remote Mount Adaptor.
9 Mount and tighten the RFU-D-HP radios on each side of the RFU-D-HP Dual Coupler using the screws assembled on
RFU-D-HP radio. Pay attention that the O-rings are correctly assembled on the radio port of the RFU-D-HP Dual
coupler.
Page 87 of 179