Cambium Networks PTP 820 Series Installation Manual page 86

Installation Guide for RFU-D-HP
5 Mount and tighten the RFU-D-HP DC pole mount to the pole using the four washers and screws supplied with the
RFU-D-HP DC pole mount kit. See Steps 0 and 0 in Section Chapter 0, 2+0 Dual Polarization Remote Mount.
6 Mount and tighten the RFU-D-HP Remote Mount Adaptor plate (supplied in RFU-D-HP Adaptor Remote Mount kit)
to the RFU-D-HP Pole Mount using the four flat screws supplied with the RFU-D-HP Adaptor Remote Mount kit.
7 Mount and tighten the RFU-D-HP Radio to the RFU-D-HP Pole Mount using the four flat screws supplied with the
RFU-D-HP Radio.
Page 86 of 179