Installation Guide for RFU-D-HP
Procedure
1
Mount and tighten the two Branching Pillars to a pole with a diameter of 114 mm using the four
M10x150 screws, four washers, and eight nuts supplied with the OCU Mounting kit. Use torque of
45 Nm.
2
Mount and tighten the Branching Pole to one of the Branching Pillars using the four M10x25 screws
supplied with the OCU Mounting kit. Use torque of 45 Nm.
2
Holes for
Screws
1
Page 130 of 179
M10x25
Screws