Installation Guide for RFU-D-HP
2
Mount and tighten the RFU-D-HP MC Dual Cir to the RFU-D-HP MC Extender using the four M8 Hex
screws and washers supplied within the kit.
6-11GHz
1
Mount and tighten the RFU-D-HP Dual Cir to each side of the IP-20 MC Dual Circ using the four M8 Hex
screws and washers supplied in the IP-20 Dual Circ kit. Pay attention that the O-rings on the RFU-D-HP
MC Dual Circ are well in place during the mounting.
Page 124 of 179