Mount The Building Platform; Mount The Lcd Panel - Geeetech Prusa I3 X Building Instructions

Step 1. Taut the belt tightly, determine a good place for the second hole of the belt.
Step 2. Punch a M2.5 hole on one end of the belt（the hole can be as the diameter of
the M2.5 screw , leave enough margin ）
Step 3. Fix the belt on one side of the belt -mount with a M3 x 8 screw and washer.

21. Mount the building platform.

Part name
Building platform
Heatbed set
wing nut
Hex Counter-
sunk-head screw
Spring
Step 1.Stack the heatbed and the aluminum plate together.
Step 2.connect the heatbed and the aluminum plate to the acrylic plate(A15) with 4
Hex Counter-sunk-head screw with the spring in between.
Step 3. Lock the screw with a wing nut.
For detailed video tutorial, please watch

23. Mount the LCD panel

Shenzhen GETECH CO.,LTD
GEEETECH
Part ID Required number
No.44
No.53,54,55
No.42
No.19
No.33
here.
1
1
4
4
4
pic