Y Belt Driving Wheel - Geeetech Prusa I3 X Building Instructions

Step2. Then screw the motor on the block plate with 3 M3 x 12 screws .
Insert the motor holder into the slot; you may need to use a little strength to do this.
Fix the holder plate with 2 M3 x 16 screws and M3 square nut.
*be careful in case the Acrylic break down.
You can watch the video here.

4. Y belt driving wheel

Part name
Driven wheel
holder
Ball Bearing
Shenzhen GETECH CO.,LTD
GEEETECH
Part ID Required number
No.40
No.35
1
2
pic