Ametek DR5200 Quick Start Manual page 24

INSTALLATION
DR5200
2
Equipment needed
Figure 2-32: Equipment needed
1 Device (with a Metallic Horn or Wave Guide antenna option only)
2 Antenna extension. From left to right: straight, S-bend and L-bend (right-angle) extension.
3 10 mm open-end or box-end wrench (not supplied)
4 3 hex head screws M6×25-A4-70 (supplied in a plastic sachet)
DR5200QS-LM, EDO#6-13-112 - Issue #3 www.drexelbrook.com 24