Table of Contents
Advertisement
DR5200
7 If the antenna extension is supplied after delivery of the device, it is necessary to change the
device settings. Make a selection from one of the procedures (2A or 2B) that follow: straight
antenna extension, S-bend antenna extension or L-bend (right angle) antenna extension.
Procedure 2A: Device settings for a device with a straight antenna extension
• Enter the SUPERVISOR menu (2.0.0).
• Push [> > > > ], 2 × [ ], [> > > > ] and 6 × [ ] to go to menu item ANTENNA EXTENSION (2.3.7).
• Push [> > > > ] to change the value. Push [> > > > ] to change the position of the cursor. Push [ ] to
decrease the value or [ ] to increase the value.
i
If the antenna extension has a length of 500 mm, enter the value "500" (if units for this
menu item are in mm).
• Push 3 × [^ ^ ^ ^ ] to go back to the "STORE" screen.
• Push [ ] or [ ] to set the screen to STORE YES
i
End of the procedure.
Procedure 2B: Device settings for a device with an S-bend or L-bend (right angle)
antenna extension
• Enter the SUPERVISOR menu (2.0.0).
• Push [> > > > ], 2 × [ ], [> > > > ] and 6 × [ ] to go to menu item ANTENNA EXTENSION (2.3.7).
• Push [> > > > ] to change the value. Push [> > > > ] to change the position of the cursor. Push [ ] to
decrease the value or [ ] to increase the value.
i
If units are in mm, enter the value "221" (for an S-bend extension) or "236" (for an L-bend
extension).
• Push [^ ^ ^ ^ ] to go back to the menu. Push 2 × [ ] to go to menu item DIST.PIECE (2.3.9).
• Push [> > > > ] to change the value. Push [> > > > ] to change the position of the cursor. Push [ ] to
decrease the value or [ ] to increase the value.
If units are in mm, enter the value "243" (for an S-bend extension) or "236" (for an L-bend
i
extension).
• Push 3 × [^ ^ ^ ^ ] to go back to the "STORE" screen.
• Push [ ] or [ ] to set the screen to STORE YES
i
End of the procedure.
Settings for devices with antenna extensions in mm
Antenna extension type
Straight
S-bend
L-bend (right angle)
1 This value depends on the length of the antenna extension. Enter the length of the antenna extension: 100, 200, 300,
400, 500 or 1000 mm
2 If the device has a high temperature extension, add 120 mm to this value
For more data about the dimensions of devices with antenna extensionsFor more data about the
dimensions of devices with antenna extensions, refer to "Dimensions and weights" in the
handbook.
DR5200QS-LM, EDO#6-13-112 - Issue #3
STORE YES
STORE YES and push [^ ^ ^ ^ ].
STORE YES
STORE YES and push [^ ^ ^ ^ ].
STORE YES
STORE YES
ANTENNA EXTENSION (2.3.7)
1
221
236
www.drexelbrook.com
INSTALLATION
Device settings
DIST.PIECE (2.3.9)
0
2
243
2
236
2
2
26
Advertisement
Table of Contents
