Ametek DR5200 Quick Start Manual page 46

DR5200
Screen
DR5200QS-LM, EDO#6-13-112 - Issue #3
Steps
•
Push [> > > > ] to make a selection from the
available spectra.
•
[^ ^ ^ ^ ] to confirm.
•
[> > > > ] to set to "Yes". [ ] to set to "No".
www.drexelbrook.com
OPERATION
Description
Recording in progress Recording in progress Recording in progress Recording in progress
Reading in progress Reading in progress Reading in progress Reading in progress
The device does a scan for objects that do
not change their vertical positions in the
tank (heating tubes, agitators, fuel
assemblies etc.) and records the data.
This shows a set of spectra (signals found in
the tank). It also gives the amplitude and
location of each signal.
Do you want to save the spectrum? Do you want to save the spectrum?
Do you want to save the spectrum? Do you want to save the spectrum?
Set to "Yes" to use the data. Set to "No" to
erase the data.
4
46