Display: Initial Configuration Language Selection; Display: Ip Address Settings In The Initial Configuration - Solar-Log 2000 Installation Manual

Direct Device Configurations (Solar-Log 1200 and 2000)

Display: Initial configuration language selection

•
Enter the IP address for the Solar-Log™ in the second step.
Alternately, check obtained IP address automatically if the Solar-Log™ is connected to a router
with the DHCP service enabled.

Display: IP address settings in the initial configuration

•
The next step refers to the interfaces of the connected devices. The Solar-Log™ inquiries about
each connected device per interface. Select the respective device or manufacturer.
130