Yield; Configuration Example For Filtering Status And Fault Codes - Solar-Log 2000 Installation Manual

Configuring Notifications
•
The Max. per day box defines how many notifications per day should be sent from this code
range.
•
SAVE settings
Configuration example
Status codes 0 to 8, 12 to 15 and 31 to 45 should result in an e-mail notification being sent. The fault
codes 0 to 30 should result in a text messages (SMS) notification being sent.
This results in the following configuration:

Configuration example for filtering status and fault codes

18�3 Yield:
Yield notifications can be configured in this tab.
Notifications per e-mail section
Procedure
Select the extent of the yield notification message in this section. The following selection options are
available:
•
Deactivated
•
Yield overview short
•
Yield overview (all INV)
•
Yield overview (all INV & groups)
•
Send Time
The
It is best to use the send time for the point when the inverters stopped feeding power.
•
Check the
•
SAVE settings
Text message (SMS) notifications
Procedure
•
Activate the Text message (SMS) notification
•
The Send Time
It is best to use the send time for the point when the inverters stopped feeding power.
•
Check the
•
SAVE settings
90
Note
can be entered in the text box.
days on which the e-mails should be sent. E-mails are only sent on the days checked.
can be entered in the text box.
days on which the e-mails should be sent. E-mails are only sent on the days checked.
If the maximum number of notifications per day
is defined too low, this can lead to important
messages not being sent.
button