Configuring The Time On The Solar-Log - Solar-Log 2000 Installation Manual

Time section
Solar Log™ has an integrated real-time clock which can maintain the clock time even in the case of a
power failure or grid disconnection, and for a long period (50 days).
The clock time is factory-set, but it may be lost due to long periods of storage.
The time zone, date and summertime values must be set correctly, so that no incorrect statuses or
results are obtained during monitoring and graph display, e.g. when e-mail messages are sent or when
a curve is displayed on the day graph.

Configuring the time on the Solar-Log™

Adjust the time in the Configuration | System | Language/Country/Time
Adjust the new system time
Procedure
•
The current system time is displayed
•
To change the time,
DD/MM/YY HH:MM:SS
For example: 05.08.13 15:57:00 for 5 August 2013 15 Hours 57 Minutes 0 seconds (3:57 p.m.)
•
SET a new date and time
Adjust the time zone
Procedure
•
Enter the time difference
Default: GMT +1
•
Save Entry
Set Day Light Saving Time
Procedure
•
Select the corresponding
Options: no, CEST (Central European Summer Time), USA
•
SAVE settings
enter the new time in the following format
in hours
Day Light Saving Time settings
System Configuration
menu.
103