Device Detection; Device Detection - Not Started Yet - Solar-Log 2000 Installation Manual

16�4 Device detection
During the Device Detection process, all of the predefined devices in the Device Definition menu
which are connected to the Solar-Log™ interfaces are searched for and recognized. During the Device
Detection process, the Solar-Log™'s internal data structure is prepared for these devices.
Procedure:
•
Select Configuration | Devices | Detection from the menu
•
The devices which were predefined in the Device Definition menu are displayed in the overview.

Device detection - not started yet

•
START

Device Detection

•
The Device Detection goes from the top listed interface to the bottom listed interface when
searching for devices.
The status of the Device Detection is displayed in the
Progress of the Device Detection
•
The detected devices
•
all of the devices
If on a bus have been
search is then continued on the next bus.
•
The Device Detection is completed once all of the buses have been checked.
Status message: New device detected, the data is being reformatted.
•
Restart the Solar-Log™
are displayed with the number of devices
detected,
progress bar
per bus.
the rest of the search can be skipped. The
Configuring connected devices
81