23�2�2 Fault Messages Wifi - Solar-Log 2000 Installation Manual

23�2�3 Fault messages WiFi
These fault messages are shown in the LCD display and also in the Status box under
Network | WiFi.
Fault messages WiFi
Error code
10
11
12
20
21
30
99
Message
Initialization error
Incorrect WiFi configura-
tion
Error while initializing the
wireless LAN module
Error while connecting
No access point found
Authentication failure
Unknown error
Possible cause or remedy
Please check if all of the required pa-
rameters were configured.
Potential hardware failure Contact tech-
nical support
The signal is too weak. Other network
signals are interfering with the connec-
tion.
The access point is turned off or not
available. The SSID was entered incor-
rectly.
The network key entered is incorrect.
The encryption type entered is wrong.
An unexpected error occurred. If this
error continues to occur, contact our
technical support.
Faults
Configuration |
145