20�4 Licenses; 20�5 Firmware - Solar-Log 2000 Installation Manual

20�4 Licenses
Certain Solar-Log™ functions have to be activated by entering a license code. You receive a license
certificate after purchasing a license for a particular function. The licenses are always linked to the se-
rial number of the particular Solar-log™ and can only be used with the device with this serial number.
Procedure
•
Enter the license code in the license code section
•
Activate license code
Activating licenses section
In the Active licenses section, all of the activated functions and license codes are displayed
20�5 Firmware
The firmware tab offers the following functions:
•
Information about the current firmware version
•
Firmware Update
Status section
The firmware version currently installed on the Solar-Log™ is displayed. The version number contains
three sections:
Version number
3.0.0 Build 60
Example version number
Updating firmware manually section
This function allows a new firmware to be imported from a disk.
Note
Note
Build Date
23.03.2013
Before manual updating, it is important to save
the current system data and make a backup.
Clear the browser's cache after updating the
firmware to prevent any possible display errors.
System Configuration
105