Solar-Log 2000 Installation Manual page 71

Network address settings section
Note
All routers usually come with the DHCP service enabled by default, so that all the subsequent data are
entered automatically:
IP address, Subnet mask, Gateway and DNS server
The settings can also be manually configured in these boxes. The DHCP function then needs to be
deactivated in the Solar-Log™.
If necessary, please consult a network specialist who can assign a suitable network address in regard
to IP address, Subnet mask and Gateway, for example.
Alternate DNS server
In some networks, the DNS server is a separate address for resolving Internet addresses (unlike a
gateway). In this case, the IP address of the DNS server is entered here. The alternate DNS server can
also be configured manually from the
These settings apply to the wireless connection
to the router. We recommend using DHCP. The
IP address is obtained automatically if the Solar-
Log™ is connected to an Internet router with the
DHCP service enabled. After saving and the au-
tomatic restart, the new IP address is displayed.
Network | Ethernet menu.
Configuration Menu
71