12. Remove the cutting module.
13. Remove the 3 screws that hold the hight adjustment
motor.
14. Remove the height adjustment motor.
15. Install in opposite sequence.
Note: Replace the sealing strip every time you
assemble the front chassis. Refer to
sealing strips on page 23 .
1061 - 001 -
5.7 Main cables
5.7.1 To replace the front main cable
1. Remove the front top cover. Refer to
2. Remove the front bumper tail. Refer to
3. Remove the front body. Refer to
4. Remove the front upper chassis. Refer to
To replace the
install the front top cover on page 13 .
and install the front bumper tail on page 14 .
install the front body on page 14 .
and install the front upper chassis on page 15 .
To remove and
To remove
To remove and
To remove
Repair instructions - 37