7. Disconnect all the cables from the battery.
8. Remove the battery.
9. Install in opposite sequence.
5.10.2 To remove and install the battery cable
1. Remove the battery. Refer to
on page 55 .
2. Remove the rear top chassis. Refer to
and install the rear upper chassis on page 29 .
3. Turn the rear lower chassis upside up.
56 - Repair instructions
To replace the battery
To remove
4. Remove the battery cable from the bracket clip.
5. Disconnect the battery cable from the motor control
circuit board.
6. Remove the battery cable.
7. Install in opposite sequence.
1061 - 001 -