Husqvarna AUTOMOWER 535 AWD Operator's Manual
  1. Manuals
  2. Brands
  3. Husqvarna Manuals
  4. Lawn Mower
  5. Automower 535 AWD
  6. Operator's manual
Husqvarna AUTOMOWER 535 AWD Operator's Manual

Husqvarna AUTOMOWER 535 AWD Operator's Manual

Hide thumbs Also See for AUTOMOWER 535 AWD:
Table of Contents

Advertisement

Quick Links

Download this manual
Operator's manual
®
HUSQVARNA AUTOMOWER
535 AWD
EN, English
Read the operator's manual carefully and make sure that you
understand the instructions before you use the product.

Advertisement

Table of Contents
loading

Related Manuals for Husqvarna AUTOMOWER 535 AWD

Summary of Contents for Husqvarna AUTOMOWER 535 AWD

  • Page 1 Operator's manual ® HUSQVARNA AUTOMOWER 535 AWD EN, English Read the operator's manual carefully and make sure that you understand the instructions before you use the product.

  • Page 2: Table Of Contents

    Contents 6.1 Introduction - troubleshooting......34 1 Introduction 6.2 Fault messages...........34 1.1 Support..............3 6.3 Information messages.........40 1.2 Product description..........3 6.4 LED indicator of the charging station....40 ® 1.3 Automower Connect........... 3 6.5 Symptoms............41 ® 1.4 Automower Intellegent Mapping (AIM)....3 6.6 Find breaks in the loop wire........

  • Page 3: Introduction

    The serial number and the product number are on the product rating plate and on the product carton. • Register your product on www.husqvarna.com. Enter the serial number of the product, the product number and the date of purchase to register your product.

  • Page 4: Product Overview

    1.5 Product overview Front body On/Off-button Ultrasonic sensors LED status indicator Front top cover 10. STOP button Lifting handle 11. START button Rear top cover 12. Front wheels Rear body 13. Rear wheels Charging plates 14. Battery cover 4 - Introduction 1427 - 006 - 25.11.2021...

  • Page 5: Symbols On The Product

    15. Rear chassis box with electronics, motors and WARNING: Keep a safe dis- battery tance from the product when 16. LED for operation check of the charging station operating. Keep your hands and boundary wire and feet away from the rotat- ing blades.

  • Page 6: Symbols On The Battery

    1.7 Symbols on the battery LED indication Status WARNING: Lithium-ion batteries can Green In operation explode or cause fire if disassembled, Blue Parked short-circuited or handled roughly. Do not expose to water, fire or high temperature. Error Yellow Paused/stopped Flashing yellow PIN code needed Read the user instructions.

  • Page 7: Safety

    2 Safety 2.1 Safety information 2.1.1 IMPORTANT. READ CAREFULLY BEFORE USE. KEEP FOR FUTURE REFERENCE The operator is responsible for accidents or hazards occurring to other people or property. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities (that could affect a safe handling of the product), or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person...

  • Page 8: Safety Definitions

    The appliance must be disconnected from the supply mains when removing the battery. WARNING: The product CAUTION: Used if there is a risk of damage to the product, other materials or can be dangerous if used the adjacent area if the instructions in the manual are not obeyed.
  • Page 9 Schedule on page 21 . Refer to occur and create a potential risk of fire. • Husqvarna does not guarantee full compatibility • Check that there are no foreign objects such as between the product and other types of wireless stones, branches, tools or toys on the lawn.
  • Page 10 2.3.4 Maintenance CAUTION: Do not lift the product when it is parked in the charging station. It can WARNING: The product must be damage the charging station and/or the switched off before it is turned upside down product. Push the STOP button and pull the and before any maintenance is done.

  • Page 11: Installation

    When the product has cut the grass for some time, the perceived sound level is much lower. Note: Refer to www.husqvarna.com for more information about installation. 3.4 Before the installation of the wires You can select to attach the wires with stakes or bury 3.2 Main components for installation...
  • Page 12 3.4.3 To examine where to put the • Put the charging station in an area with protection from the sun. boundary wire • If the charging station is installed on an island, make sure to connect the guide wire to the island. CAUTION: There must be a barrier of To make an island on page 14 .
  • Page 13 3.4.4 To examine how to put the boundary wire around the charging station • Husqvarna recommends to put the boundary wires " > 5 cm / 2 straight out from the charging station (A). "...
  • Page 14 The gradient (%) is calculated as height for each m. Note: If a passage is less than 2 m / 6.5 ft. wide, Example: 10 cm / 100 cm = 10%. install a guide wire through the passage. 100 cm/40" The product always runs to the left of the guide wire as 10 cm/4"...
  • Page 15 CAUTION: Isolate or remove obstacles that are less than 15 cm / 6 in. in height. Isolate or remove obstacles that slope slightly, for example, stones, trees or roots. This will prevent damage to the blades of the product. Note: The product must be manually moved between the main area and the secondary area.

  • Page 16: Installation Of The Product

    The product is only to be Put the product in the secondary area and select used with the power supply unit supplied by Secondary area mode . Husqvarna. WARNING: Do not put the power supply at a height where there is a risk it can be put in water.
  • Page 17 WARNING: Do not encapsulate the power supply. Condensed water can harm the power supply and increase the risk of electrical shock. min 30 cm / 12” WARNING: Risk of Electric Shock. Install only to a residual-current device (RCD) with a tripping current of maximum 30 mA when connecting the power supply to Connect the power supply cable to a 100-240V the power outlet.

  • Page 18: To Put The Wire Into Position With Stakes

    Cut the boundary wire 1-2 cm / 0.4-0.8 in. above each connector. Put the right end of boundary wire into the channel with the mark "AR". Put the left end of boundary wire into the channel with the mark "AL". Push the right connector onto the metal pin on the Put the 2 ends of the boundary wire and the charging station with the mark "AR".

  • Page 19: To Bury The Boundary Wire Or The Guide Wire

    CAUTION: Cutting the grass too low right after installation can damage the wire insulation. Damage to the insulation may not cause disruptions until several weeks or months later. Put the boundary wire and the guide wire on the ground. Put the stakes at a maximum of 75 cm / 30 in. distance from each other.

  • Page 20: Automower ® Intellegent Mapping (Aim)

    ® Download the Automower ® Connect app on your 3.11 Automower Intellegent Mapping mobile device. (AIM) Sign up for a Husqvarna account in the ® Automower Intellegent Mapping (AIM) is available in ® Automower Connect app. the Automower ®...

  • Page 21: To Start The Product For The First Time

    Log on to your Husqvarna account in the Automower ® Connect app to pair your product with ® Automower Connect. Note: It is recommended to pair your product ® with Automower Connect to get access to all functions in the product. If it is not necessary to ®...
  • Page 22 Note: Note: The operation capacity is approximate and is This can cause that the grass is not cut around calculated for flat and open work area. If the work area the obstacle. This function can cause the product to not has a lot of slopes or obstacles, you need to increase cut high grass satisfactorily.
  • Page 23 Use the Note: function if the work area includes remote parts that are Husqvarna recommends to set the charging connected with narrow passages to keep a satisfactorily max . It is usually better to move the station signal to cut work area.
  • Page 24 The default settings lets the product follow the guide 3.13.6.2 Reset to factory settings wire 300 m / 980 ft. in 20% of the times it moves out The user settings can be reset to factory settings. from the charging station. If the guide wire is less than 300 m / 980 ft.
  • Page 25 Mowing profiles the product the same location. In the settings, map objects and their settings are saved. ™ 3.13.11 Husqvarna Fleet Services ™ Husqvarna Fleet Services is a cloud solution that gives the commercial fleet manager an overview of all ™...

  • Page 26: Operation

    4 Operation 4.1 To switch on the product WARNING: Read and understand the safety chapter before you switch on the product. WARNING: Keep your hands and feet away from the rotating blades. Do not put your hands or feet near or below the product when the cutting motor is running.

  • Page 27: To Stop The Product

    4.4 To switch off the product necessary to pause operation, for example for temporary irrigation or work on the lawn. Push the STOP button to stop the product. 4.2.4 The charging station's park button The PARK button on the charging station is used to call the product back to the charging station.

  • Page 28: To Adjust The Cutting Height With Automower Connect

    Put the product in as far as possible and make sure it is connected to the charging station. The battery status can be monitored on the status bar of the display. Note: If the battery is empty the product needs to charge for a longer time period before the product is possible to start.

  • Page 29: Maintenance

    Use a soft brush to clean the product. • Clean the bottom of the chassis with a brush or a Husqvarna recommends to use a special cleaning and moist cloth. maintenance kit, available as accessory. Speak to your Husqvarna representative for more information.

  • Page 30: Replacement Of The Blades

    Remove grass, twigs and other objects from the charging station. 5.3 Replacement of the blades WARNING: Husqvarna can only guarantee safety if you use Husqvarna original blades with the embossed crowned H-mark logotype. Remove the 3 screws. Use a manual straight slot WARNING: or cross-tip screwdriver.

  • Page 31: To Replace The Top Covers

    Fasten new blades and screws. Check that the blades can pivot freely. 5.4 To replace the top covers The top cover is an accessory available in different colors. Speak to your local Husqvarna representative for more information. CAUTION: Clean grass and dirt from the product before you remove the covers.
  • Page 32 Put a protection between the cover and the link arm. This is to prevent damage to the top cover. Pull up the top cover. Push the front top cover into position. Remove the top cover. 5.4.3 To remove the rear top cover To switch off the Switch off the product.

  • Page 33: Battery

    Contact your local Husqvarna representative to replace the battery. 5.6 Winter service Take your product to your Husqvarna central service for service prior to winter storage. Regular winter service will maintain the product in good condition and create the best conditions for a new season without any disruptions.

  • Page 34: Introduction - Troubleshooting

    Automower Connect and some the message needs to be confirmed on the product. Contact Messages on your local Husqvarna representative if the same message appears often. For more information, refer to page 25 . Message...
  • Page 35 PIN code to your registered e-mail address. If you have not registered the e-mail address, contact your local Husqvarna representative. Empty battery The product cannot find the charging station. Change the position of the guide wire. Refer To install the guide wire on page 18 .
  • Page 36 Message Cause Action Lifted A blockage has activated the lift senors and Remove the product from the blockage. If the caused the product to stop. problem remains it requires action by author- ized service technician. Slope too steep Mower stopped because the slope is too Change the installation of the boundary wire steep.
  • Page 37 Message Cause Action Battery temperature The product does not operate if the battery The product starts to operate again when the outside limits temperature is too high or too low. temperature is between the set limits and the schedule settings let the product to operate. Make sure that the charging station is put in an area with protection from the sun.
  • Page 38 Message Cause Action Limited cutting height The cutting height adjustment cannot move. Examine the cutting height adjustment and remove grass and other unwanted material. Unexpected cutting If the problem remains, the message re- height quires action by authorized service techni- cian.
  • Page 39 Message Cause Action No loop signal The power supply or the voltage cable are Examine the LED status on the charging sta- not connected. tion. If the LED is not lit, it indicates that there is no power. Examine the power outlet con- nection and whether an earth-fault breaker has tripped.

  • Page 40: Information Messages

    ® The table below shows a number of information messages that may be shown in Automower Connect. Contact your Messages on page local Husqvarna representative if the same message appears often. For more information, refer to 25 . Message Cause...

  • Page 41: Symptoms

    If your product does not work as expected, follow the symptoms guide below. There is a FAQ (Frequently Asked Questions) on www.husqvarna.com which provides more detailed answers to a number of standard questions. Contact your local Husqvarna representative if you still cannot find the reason for the fault.
  • Page 42 Symptoms Cause Action The product mows Grass or other foreign object blocks the Remove and clean the blade disc. Refer to Replacement of the blades on page 30 . for shorter periods blade disc. than usual between Battery on The battery is spent. Replace the battery.

  • Page 43: Find Breaks In The Loop Wire

    Symptoms Cause Action The cellular connec- There is a problem with the cellular connec- • Make sure that you have cellular cover- tion has worked be- tivity. age in the area. fore, but does not • Disable Automower ® Connect in the work now.
  • Page 44 GUIDE Guide To rectify the fault you will need boundary wire, connector(s) and coupler(s): a) If the suspected boundary wire is short then it is easiest to exchange all of the boundary wire between AL and the point where the guide wire is connected to the boundary wire (thick black line).
  • Page 45 Continue until only a very short section of the wire remains which is the difference between a solid green light and a flashing blue light. Then follow instruction in step 5 below. If indicator lamp still flashes blue in step 3 above: Put AL and G1 back in their original positions.

  • Page 46: Transportation, Storage And Disposal

    Note: If you keep the charging station outdoors, do not disconnect the power supply and the connectors. • Speak to your Husqvarna service for information about available storage accessories for your product. 7.3 Disposal • Obey the local recycling requirements and applicable regulations.
  • Page 47 Disconnect the two cables from the battery and remove the battery. 1427 - 006 - 25.11.2021 Transportation, storage and disposal - 47...

  • Page 48: Technical Data

    8 Technical data 8.1 Technical data ® Dimensions Automower 535 AWD Length, cm / in. 93 / 36.6 Width, cm / in. 55 / 21.6 Height, cm / in. 29 / 11.4 Weight, kg / lbs 17.3 / 38.1 ® Electrical system Automower 535 AWD...
  • Page 49 Power Class 3 23 dBm Husqvarna AB does not guarantee full compatibility between the product and other types of wireless systems such as remote controls, radio transmitters, hearing loops, underground electric animal fencing or similar. The guide loop is the loop that if formed by the guide wire and the part of the boundary wire from the junction with the guide wire to the right connection in the charging station.

  • Page 50: Registered Trademarks

    3 . 8.2 Registered trademarks Bluetooth ® Bluetooth SIG, inc. and any use of such word mark and logos are registered trademarks owned by marks by Husqvarna is under license. 50 - Technical data 1427 - 006 - 25.11.2021...

  • Page 51: Warranty

    The blades and wheels are seen as disposable and are not covered by the warranty. If an error occurs with your Husqvarna product, please contact Husqvarna customer service for further instructions. Please have the receipt and the product’s serial number at hand when contacting Husqvarna customer service.

  • Page 52: Applicable To Us/Ca Market

    Conformity interference by one or more of the following measures: • Reorient or relocate the receiving antenna. Issuer: Husqvarna AB, Drottninggatan 2, S-561 82 Huskvarna, Sweden www.husqvarnagroup.com. • Increase the separation between the equipment and receiver.
  • Page 53 1427 - 006 - 25.11.2021 Applicable to US/CA market - 53...
  • Page 54 54 - Applicable to US/CA market 1427 - 006 - 25.11.2021...
  • Page 55 1427 - 006 - 25.11.2021 Applicable to US/CA market - 55...
  • Page 56 AUTOMOWER ® is a trademark owned by Husqvarna AB. © Copyright 2021 HUSQVARNA. All rights reserved. www.husqvarna.com Original instructions 1142742-95 2021-12-08...

Table of Contents