Programming A New Application Board - Husqvarna Automower 435X AWD Workshop Manual

Manual test
•
Firmware
•
Actions
•
• Log book
Documents
•
Customers
•
4.3.1 Home
When the product is connected to Autocheck an
overview is presented in the
Recommended actions are also shown, for example
recommended firmware updates.
4.3.2 Auto test
Auto test is suitable to use for a fast and overall status of
Auto test menu you can select or
the product. In the
deselect tests. All tests run in a sequence after you
Start Auto test . During the tests there are
press
animations guiding you what to do.
Auto test the results are presented in a list.
After the
When clicking on a test there is more information
presented on the screen. It is also possible to print a
report of the test result.
4.3.3 Manual test
Manual test you select each test, and
When using the
start and stop the different tests by yourself. The result
is shown live on the screen and there are no test reports
Manual test is appropriate to use when you
available.
want to test a specific component and allow it to work for
a certain period.
4.3.4 Firmware
Firmware menu Autocheck updates the product
In the
software if necessary.
CAUTION: The product must be fully charged
and placed in the charging station before
starting the software update.
CAUTION: Always let Autocheck complete a
started programming process. An interrupted
programming can block the application board.
During a software update the following LED status
indications can occur:
10 - Autocheck service tool
Home menu.
LED indication
Steady White
Pulsating White
Pulsating Red/White
Steady Red/White
Steady Green/White
4.3.5 Actions
Actions menu shows:
The
• Reset : Contains reset functions, for example Reset,
New start-up sequence.
Unit replacement : Has the functionality to set the
•
product serial number if the application board is
exchanged.
Remote HMI : Contains additional functions like
•
Demo mode and Override loop detection . It is also
Security code from the product.
possible to get the
4.3.6 Log book
Log book contains the Fault memory where, for
The
example, the product's error codes can be found.
Additional Log book functions are continuously
implemented.
4.3.7 Documents
When a product is connected to Autocheck, only the
relevant technical documentation for that model is
shown. It is however possible to uncheck the box for the
connected product and search for all available
documents in Autocheck, for example spare parts lists,
service bulletins, workshop manuals and operator's
manuals.
4.3.8 Customers
In the customer's menu a list of all the customers and
their products is available. The list is only saved locally.

4.4 Programming a new application board

If the application board is replaced, the new application
board must be programmed. The application board
includes information about the product's serial number.
Note: It is recommended to have internet access when
programming a new application board.
There are 2 options when programming a new
application board:
• Serial number in Autocheck - If you have internet
access, the serial number is populated
automatically. If you work offline, you must enter the
serial number manually in Autocheck.
Status
New software is available.
Confirm to start the soft-
ware update.
Software update is ongo-
ing.
®
Bluetooth software: In-
stallation failed.
Other software: Installation
failed.
Software installation suc-
cessful.
1061 - 001 -