Husqvarna Automower 435X AWD Workshop Manual page 27

4. Pull out the rear top cover.
5. Install in opposite sequence.
5.4.3 To remove and install the rear body
1. Remove the rear unit. Refer to
the rear unit on page 24 .
2. The rear body is attached to the chassis at 4
positions. At each position, hold the chassis with one
hand and loosen the rear body with a quick and
short pull.
1061 - 001 -
To remove and install
3. Pull out the grommet.
4. Disconnect the charging cable.
Repair instructions - 27