Husqvarna Automower 435X AWD Workshop Manual page 53

7. Disconnect the motor cables from the motor control
circuit board.
A
B
8. Remove the 4 screws for the wheel motor.
9. Remove the wheel motor.
1061 - 001 -
10. Install in opposite sequence.
5.9.3 To replace the rear wheel motors
1. Remove the rear unit. Refer to
the rear unit on page 24 .
2. Remove the rear body.
rear body on page 27 .
3. Remove the pivoting arm.
pivoting arm on page 28 .
4. Remove the rear upper chassis.
install the rear upper chassis on page 29 .
5. Remove the rear circuit boards bracket. Refer to
remove and install the rear circuit board bracket on
page 48 .
6. Remove the rear wheels. Refer to
install the wheels on page 52 .
7. Disconnect the motor cables from the rear motor
control circuit board.
8. Remove the 4 screws for the wheel motor.
To remove and install
To remove and install the
To remove and install the
To remove and
To remove and
Repair instructions - 53
To