Husqvarna Automower 435X AWD Workshop Manual page 17

12. Remove the front upper chassis.
13. Install in opposite sequence.
CAUTION: Make sure that no cables are
pinched.
Note: Replace the sealing strip every time you
assemble the front chassis.
Note: Attach a new warranty seal.
Note: Make sure that the grommets seal properly
against moisture.
1061 - 001 -
5.3.5 To remove and install the center console
1. Remove the front top cover. Refer to
install the front top cover on page 13 .
2. Remove the front bumper tail. Refer to
and install the front bumper tail on page 14 .
3. Remove the front body. Refer to
install the front body on page 14 .
4. Bend the HMI lid to loosen the clips.
5. Remove the HMI lid.
To remove and
To remove
To remove and
Repair instructions - 17