Entering Names - Satel VERSA Programming Manual

SATEL
Shown on the right side in the upper line of the display is information about the letter
case: [ABC] or [abc] (it will be displayed after pressing any key and will be visible for
a few seconds after the last keystroke).
The key moves the cursor to the right, and the
key deletes the character on the left side of the cursor.
key
1
2
3
4
5
6
7
8
9
0
Table 1. Characters available in the keypad when entering telephone numbers (to change the
Special character
B
C
D
E
F
#
a
b
c
d

Entering names

Keep pressing particular keys until the required character appears. Characters available
in the keypad are presented in Table 3. Hold down the key to display the digit assigned
to the key.
Shown on the right side in the upper line of the display is information about the letter
case: [ABC] or [abc] (it will be displayed after pressing any key and will be visible for a
few seconds after the last keystroke).
The key moves the cursor to the right, and the
key deletes the character on the left side of the cursor.
Characters available after next keystroke
mode [ABC]
#
B C
D E F
letter case, press
switch-over to pulse dialing
switch-over to tone dialing (DTMF)
waiting for additional signal
3 second pause
10 second pause
signal in DTMF mode
signal # in DTMF mode
other signals generated in DTMF mode
Table 2. Special character functions.
VERSA
key
).
Function description
key – to the left. The
mode [abc]
1 #
2 a b
3 d
4
5
6
7
8
0
key – to the left. The
13
c