Keypad - Satel VERSA Programming Manual

SATEL
Tamper signaled in partition – the partition in which tamper alarm will be triggered in the
event of tamper or disconnection of the device from the system.
7.1

Keypad

Fig. 13. Programming keypad settings in the D
Signaling CHIME from zones – a list of zones which, when violated, will generate chime
signal in the keypad.
Date/Time format – display mode for time and date.
LCD backlight – display backlight mode in the LCD keypad.
Keys backlight – backlight mode for the keys.
Auto-backlight – automatic illumination switch-on mode for the keys (in LCD keypad, also
for the display).
Sounder volume – control of the loudness level of sounds generated in the keypad.
Keypad options
– Signal entry delay – the keypad will acoustically signal the entry delay
countdown.
– Signal exit delay – the keypad will acoustically signal the exit delay
countdown.
– Signal alarms – the keypad will acoustically signal alarms. Duration of signaling is
determined by the K
signaled when the G
– Quick arming – Partition 1 – quick arming is possible in partition 1 (see: U
M ), unless the G
ANUAL
VERSA
'
EYPAD S ALARM TIME
2 global option is enabled.
RADE
2 global option is enabled.
RADE
X program (an example of configuration).
LOAD
(see: G
LOBAL TIMES
). The alarms are not
45
SER