Selection From The Single-Choice List; Selection From The Multiple-Choice List; Entering Decimal Values; Entering Hexadecimal Values - Satel PERFECTA 16-WRL Programming Manual

6

2.5.1 Selection from the single-choice list

In the lower line of the display, the currently selected item is presented. You can scroll the list
using the and

2.5.2 Selection from the multiple-choice list

In the lower line of the display, one of the items you can choose from is presented. You can
scroll the list using the
right corner of the display:
– displayed item is selected / option is enabled,
– displayed item is not selected / option is disabled.
Press any number key to change the currently shown symbol for another one.
If you want to see the status of all items (these can be e.g. zones, outputs, options, etc.),
press or
and keys to move the cursor. After hovering the cursor over the selected item,
you can change its status by pressing any number key. If you want to restore the previous
way of presentation of the list, press

2.5.3 Entering decimal values

To enter digits, use the number keys. Use the
some functions, the

2.5.4 Entering hexadecimal values

To enter digits, use the number keys. To enter the A, B and C characters, use the
and to enter D, E and F, use the
appears). Use the
character on the left side of the cursor.

2.5.5 Programming telephone numbers

To enter digits, use the number keys. To enter the +, * , # characters, use the
pressing the key until the required character appears). Use the
the cursor. The

2.5.6 Entering names

The characters that can be entered by using the keys are presented in Table 1. Keep
pressing the key until the required character appears. Long press the key to display the digit
assigned to it.
Shown on the right side in the upper line of the display is information about the letter case:
[ABC] or [abc] (it will be displayed after pressing any key and will be visible for a few seconds
after the last keystroke).
Use the and
left side of the cursor.
keys.
and
. The numbers around the display allow the items to be identified. Use the
key deletes the character on the left side of the cursor.
and keys to move the cursor. The
key deletes the character on the left side of the cursor.
keys to move the cursor. The
PERFECTA
keys. The following symbol is situated in the upper
or .
and
key (keep pressing the key until the required character
keys to move the cursor. In
key deletes the
and
key deletes the character on the
SATEL
key,
key (keep
keys to move