Subscribe to Our Youtube Channel
Related Manuals for Satel VERSA Plus Series
Summary of Contents for Satel VERSA Plus Series
- Page 1 QUICK USER MANUAL The full user manual and other manuals are available on www.satel.eu SATEL sp. z o.o. ul. Budowlanych 66 80-298 Gdańsk POLAND tel. +48 58 320 94 00 www.satel.eu versa_plus_us_en 11/17...
- Page 2 Changes, modifications or repairs not authorized by the manufacturer shall void your rights under the warranty. SATEL's goal is to continually upgrade the quality of its products, which may result in some changes of their technical specifications and firmware. The current information on the introduced modifications is available on our website.
-
Page 3: Operating The Alarm System From Keypad
1. Operating the alarm system from keypad SATEL offers the following keypads for VERSA Plus control panels: INT-TSG – hardwired touchscreen keypad (how to operate the alarm system from the INT-TSG, please refer to the manual delivered with the keypad), INT-TSH –... - Page 4 VERSA Plus SATEL green LED – indicates the partition state (each red LED – indicates alarm or alarm memory in partition has its own LED) the partition (each partition has its own LED) ON – partition is armed The information is presented for 2 seconds and blinking –...
- Page 5 SATEL VERSA Plus Arming without partition selection Disarming and/or alarm clearing [CODE] - full arming [CODE] - in both partitions [CODE] - night arming [CODE] - in partition 1 [CODE] - day arming [CODE] - in partition 2 User menu...
-
Page 6: Proximity Cards
VERSA Plus SATEL 1.1 Codes Operating the alarm system by means of the keypad is possible after entering the code. Only some functions can be run without the code being entered. Do not make your code available to other people. - Page 7 SATEL VERSA Plus 1.3.4 Arming without delay hen arming the system using one of the above mentioned methods, press and hold down the arming mode selection key ( ) for about 3 seconds. The system will become armed without delay, i.
-
Page 8: Simple Auto-Arming Deferment
VERSA Plus SATEL 1.7 Simple auto-arming deferment Partition can be armed automatically by the timer on specific days at specific time. If the control panel is properly configured by the installer, auto-arming can be easily postponed from the LCD keypad during the auto-arming delay countdown. During the auto-arming delay countdown the keypad displays a suitable message and, additionally, an audible signal can be emitted. -
Page 9: Operating The Alarm System By Means Of Keyfob
SATEL VERSA Plus LED keypad The state of z ones is i strated by LEDs designated by numbers. The steady-on LEDs indicate which zones are inhibited or isolated. The blinking (flashing) L ED means that the cursor is situated there. Use the keys to move the cursor. -
Page 10: Operating The Alarm System By Telephone
VERSA Plus SATEL The user can have two keyfobs: 433 MHz keyfob – supported by the 433 MHz keyfobs receiver expansion module or 433 MHz wireless system controlle APT-100 bidirectional keyfob – supported by the ABAX wireless system controller. - Page 11 SATEL VERSA Plus Two or more control commands can be inserted in one SMS message. When sending the USSD codes, the SMS message must have the following form: xxxx=yyyy= where "xxxx" is the control command and "yyyy" is the USSD code supported by...
Need help?
Do you have a question about the VERSA Plus Series and is the answer not in the manual?
Questions and answers