Entering Data By Means Of The Lcd Keypad; Selection From The Single-Choice List; Selection From The Multiple-Choice List; Entering Decimal Values - Satel VERSA Programming Manual

12
[82#]
[83#]
[84#]
9. User menu
The 9. U
SER MENU
remains in the service mode (press the
mode). The user menu and functions are described in the User Manual.

2.1.7 Entering data by means of the LCD keypad

The data being entered are presented on the display. The method of programming depends
on the type of data to be entered by service function. To save the data in the control panel,
press the key. To exit the function without saving the changes, press the

Selection from the single-choice list

The upper line of display shows the function name, and the lower one – the currently
selected item. To scroll through the item list, use the
keys (up). The

Selection from the multiple-choice list

The upper line of display shows the function name, and the lower one – one of the items
to choose from. To scroll through the item list, use the
keys (up). Shown in the upper right corner of the display is an additional symbol:
– displayed item is selected / option is enabled;
– displayed item is not selected / option is disabled.
Press any numerical key to change the currently shown symbol for another one.
Press the
programming. By means of the
status of all items accessible within this function (these can be e.g. zones, outputs,
options, etc.). The
left. When you press the

Entering decimal values

Digits are entered by pressing the suitable keys. The
right, and the

Entering hexadecimal values

Digits are entered by pressing the suitable keys. Characters from A to F available under
the and
The key moves the cursor to the right, and the

Programming telephone numbers

Keep pressing particular keys until the required character appears. Characters available
in the keypad are presented in Table 1. Up to 16 characters can be programmed. Some
of the special characters (a, b, c, d, # and
two items, hence the maximum number of characters available for entering, if they are
used, will be lower.
2. Key fob func.
3. Confirmations
4. Name
function enables access to the user functions when the control panel
and
or key to switch over the keypad to the graphical mode
key moves the cursor to the right, and the
or
or key – to the left.
keys. Keep pressing the keys until the required character appears.
Programming Manual
key to return to the main menu of the service
keys are not used.
and symbols, the display presents the current
key, the keypad returns to the text mode.
) are coded so that the character takes up
keys (down) and the
keys (down) and the
key – to the
key moves the cursor to the
or key – to the left.
SATEL
key.