Intel i960 Series User Manual page 17

For cyclone and pci-sdk evaluation platforms
Hide thumbs Also See for i960 Series:
Table of Contents

Advertisement

This user's guide describes the Cyclone evaluation platforms for Intel's family of i960
Cyclone EP — a standalone general purpose evaluation and development tool.
PCI-SDK Platform — Cyclone EP equipped with a PCI bus interface. Part of Intel's PCI I/O
Software Development Toolkit (SDK).
Both platforms allow you to connect one of several i960 CPU and Squall* modules. Using the different
CPU modules, you can evaluate the various i960 processors in a system environment, or "benchmark"
the performance of the various processors.
The PCI-SDK Platform — otherwise identical to the Cyclone EP — is equipped with PLX
Technology's PCI 9060 (a PCI to 80960 bus bridge chip). The single-chip PCI 9060 features mailbox
and doorbell registers that allow command and status information to pass between PCI bus devices and
local bus devices. It can also generate PCI configuration cycles, which enables the PCI 9060 to become
the PCI system host.
Unless otherwise noted, all references in this manual to "Cyclone EP" also apply to the PCI-SDK
Platform. References that are specific to PCI-SDK Platform are clearly indicated.
To
I/O Panel
Connector
Squall Module
PCI-SDK
ONLY
PLX 9060
PCI to i960
Bridge with DMA
PCI Bus
Figure 1-1. Cyclone EP and PCI-SDK Platform Functional Block Diagram
®
i960
Processor
Module
CPU
Local Bus
CIO
Counter /
®
Timers
CPU
Clock Distribution
DRAM Control
Flash ROM
Expansion
Parallel
Flash
Download
ROM
Port
DB-25 Connector
CHAPTER 1
INTRODUCTION
®
embedded processors:
Interleaved
DRAM SIMMs
UART Based
RS-232
Serial Port
Phone Jack
Connection
1-1

Advertisement

Table of Contents
loading

Table of Contents