ProMed IT-6 User Manual page 40

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 25
o
peratIng the unIt
Caution:
Is the total treatment time is lesser than 60 mi
nutes, the unit will show you this.
At a total treatment time of up to 60 minutes,
the total treatment time and average intensity is
displayed.
The total treatment time is displayed up to a
maximum value of 99:59 minutes.
To delete the memory, hold the "P"-button
(G), pressed in display, the display „cLr"
flashes.
If you wish to delete all saved data, please press the "S"-button (H), to
confirm the action. If you do not wish to delete the data, press the "P"-
button (G) and the device switches back to waiting mode.
Safety lock
The security lock is activated automatically if no button is pressed for more
than 30 seconds. To activate the safety lock itself, press the "S"-button (H)
and the "▲"-button (I) simultaneously. This is a safety feature to prevent
accidental changes of the settings, especially to prevent the set intensity. To
deactivate the safety lock, press the "S"-button (H) and the "▲"-button (I)
again. By pressing the "S"-button (H) during the treatment, you reach the
pause mode and by pressing "P"-button (G) button during the treatment,
you can stop the treatment.
Battery status display
If the battery status indicator
batteries must be replaced with new ones as soon as possible. The device
can of course be operated for more hours with the illuminating display.
Disconnecting the device
Push the switch "oN / oFF" (C) down, to switch off the device.
Caution:
1. If you see the device in waiting mode and no button is pressed for
more than 3 minutes, the display disconnects automatically to save the
power.
To indicate the user thereon, that he has not pressed the button for long,
a beep sound is heard after one minute, after second minute, two beeps
and after 3 minutes, 3 beeps and the display is turned off.
By pressing any button the display is switched on again.
2. you must turn off the device to restore it to the factory settings. Now first
press the button (J) and then push the "oN / oFF" (C) switch upwards.
appears on the display, the used
40
DE
EN
FR
IT
ES
NL
RU
PL
SE
FI

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents