Mitsubishi Electric AE-200A Instruction Book page 34

(3) Touch [OK] to go back to the previous screen.
Note: If the total of the usage ratios for each month and each day of the week are not 100%, the [OK] button cannot be
touched.
(4) Touch [Edit] on the right, and set the target usage ratios of the electric energy for each block to automatically
calculate the annual target electric energy for each block.
Usage ratio for each block
Total of the usage ratios
Item
Block name
Usage ratio for each block
Auto calc.
Annual target electric
energy for each block
WT07190X01
Block name
The names of all the registered blocks will appear.
Note: If the block name has not been registered, ["Block" + block number] will appear.
Enter the target usage ratios of the electric energy for each block.
Note: The ratios cannot be entered if the [Auto calc.] setting is set to [Yes]. To enter the desired
ratios, change the setting to [No].
Note: The total of the ratios must be 100%.
Set to [Yes] to automatically calculate the usage ratio of the electric energy and the annual
target electric energy for each block based on the indoor unit capacity.
The annual target electric energy for each block will appear after being calculated based on
the ratios in the "Usage ratio for each block" field and the value entered in the "Annual target
electric energy" field.
Description
34
Auto calc.
Annual target electric energy
for each block