Mitsubishi Electric AE-200A Instruction Book page 88

5-2-11. System View
Refrigerant system information (connection information of outdoor and indoor units) can be checked for each
AE-200 and AE-50.
Touch [Initial Settings] in the menu bar, and then touch [System View].
Note: This screen shows the information of the units that have been registered to a group and have started up successfully.
Note: The [Controller] setting will appear when the [System Exp] setting on the [Unit Info.] screen is set to [Expand]. Switch
the [Controller] setting between [AE200], [AE1], [AE2], and [AE3] to display the information for each AE-200 and AE-50
individually.
Controller
Select [AE200] to display the
information for AE-200, and
select [AE1], [AE2], or [AE3]
to display the information for
each AE-50.
Outdoor unit address
"Unit address of the main
unit (Unit address of the sub
unit)" will appear.
(1) Switch the [Controller] setting between [AE200], [AE1], [AE2], and [AE3] to check the system information for
each AE-200 and AE-50 individually.
WT07190X01
88
Indoor unit address
Unit address of the indoor
units that are connected to
the outdoor unit will appear.
Air to Water (PWFY) units
will appear, and LOSSNAY
and HWHP (CAHV) units will
not appear.