Mitsubishi Electric AE-200A Instruction Book page 29
Air conditioning control system
Hide thumbs
Also See for AE-200A:
- Instruction book (192 pages) ,
- Service handbook (108 pages) ,
- Installation manual (40 pages)
Table of Contents
Advertisement
Item
Line graph
(2) Touch [OK] to go back to the previous screen.
The display target's data and the comparison target's data will appear in a bar graph and a line graph.
Note: No graph will appear if no data that meet the specified criteria exist.
Item
Graph region
WT07190X01
Select an item to display its data in the line graph.
Note: The selectable items vary, depending on the items selected in the [Display range] and
[Display target] fields.
Display target
-
Outdoor Temp.
Set Temp. for cool
Indoor unit
Set Temp. for heat
Room Temp.
Name of the temperature sensor 1 or
humidity sensor 1
MCT
(AI controller)
*4
Name of the temperature sensor 2 or
humidity sensor 2
Name of the
temperature sensor 1
AHC
*4
Name of the
temperature sensor 2
*1 Selectable only when the outdoor temperature sensor is selected in the [External Temperature
Sensor] section on the Energy Management Settings screen, accessible via the Web Browser for
Initial Settings.
*2 "Energy Management License Pack" is required.
*3 If "Energy Management License Pack" has not been registered, only [Day] is available for selection
as a Date range. To select [Month] or [Year], "Energy Management License Pack" is required.
*4 When [Day] is selected as a Date range, the temperature values obtained every hour will appear.
When [Month] is selected, the average daily temperature values will appear. When [Year] is
selected, the average monthly temperature values will appear.
Display target
Bar graph
Line graph
Note: If no item is selected in the [Comparison target] field, only the data of the item selected
in the [Display target] field will appear in the graph.
Note: The data for a certain period of time may not appear if it does not exist due to the
changes of the daylight saving time setting or current time setting.
If the data overlap for a certain period of time due to the time overlap that was occurred
when daylight saving ended or the current time setting was changed, the newer data will
appear in the graph.
Description
Display items for line graph
Display item
*4
*4
*4
*4
Description
Comparison target
(Yellow)
(Red)
29
Display range
Address
Group
V
*1
V
*1
V
*2
V
*2
V
*2
V
*2
V
*2
V
*2
V
*3
-
V
*3
-
V
*2
-
V
*2
-
V: Item that can be displayed in the graph
Target value
(Red)
(Blue)
(Green)
Block
V
*1
-
-
-
-
-
-
-
Hide quick links:
Advertisement
Table of Contents
