Mitsubishi Electric AE-200A Instruction Book page 8

Monitor
Initial Settings
Function1
Function2
User information
WT07190X01
Function
ON/OFF (LED on the
controller)
Operation status of each group
Filter sign
Prohibition of local remote
controller operation
Measurement List
AHC List
Malfunction List
Malfunction Log
External output
Energy Use Status
Ranking
Target Value Setting
Peakcut Control Status
Date and time
License
Unit Info.
Network
Groups
Interlocked LOSSNAY
Blocks
Floor Layout
System View
Advanced
Measurement
External Temperature Interlock
Night Setback Control
Maintenance user
Building manager
ON: One or more units are in operation.
OFF: All units are stopped.
The operation status of each group can be displayed.
The filter sign indicates that the filter is due for cleaning.
The icon to indicate that the operation is prohibited by the
AE-200/AE-50 or other system controllers can be displayed.
The readings of the temperature sensor, humidity sensor, and
metering device can be displayed.
The input and output status of Advanced HVAC CONTROLLERs
can be displayed.
The address of the unit in error and the error code can be displayed.
Up to the latest 128 errors can be displayed for each AE-200/AE-50.
The ON/OFF and Error signals can be output to an external device.
(An external input/output adapter is required.)
The energy consumption data and comparison data can be
displayed in a graph.
The rankings in electric energy consumption and the fan operation
time of given indoor units can be displayed in a bar graph.
The target electric energy consumption values for the entire system
can be set.
The Peakcut control status can be checked.
The current date/time and daylight savings time can be set.
The license for optional functions can be registered.
The unit information can be set.
The network settings can be made.
Air conditioning units, Air To Water (PWFY) units, LOSSNAY units,
HWHP (CAHV) units, general equipment, remote controllers, and
sub system controllers can be registered to a group.
The operation of indoor units and LOSSNAY units can be
interlocked.
The groups can be registered to a block.
The basic floor settings, location setting of the groups, and floor plan
settings can be made.
Refrigerant system information (connection information of outdoor
and indoor units) can be checked.
The following settings can be made: [Time Master/Sub], [Schedule:
Season setting], [Hold type] (AE-200A/AE-50A only), and [Old model
compatibility mode].
AI and PI controllers, temperature sensor, humidity sensor, and
metering device can be registered.
This function adjusts the set temperature based on the temperature
difference between the set temperature and the outdoor
temperature. A temperature sensor to measure the outdoor
temperature can be selected, and a maximum temperature value to
be added to the set temperature can be set for each group.
This function performs cooling or heating operation when the room
temperature goes outside of the specified temperature range. The
start/end times and temperature range can be set for each group.
User name and password for maintenance users can be set.
User name, password, and available functions to building managers
can be set.
8
Description