Updating An Existing 11I System - HP -UX 11i Installation And Update Manual

Update the
HP-UX 11i OE
Update HP-UX 11i
OS (no OE)
Update drivers

Updating an Existing 11i System

To update an existing HP-UX 11i system to the latest release, use the
update-ux command (see the previous section) to install all new software
from the newest HP-UX 11i CDs. For example, if your system includes
the default HP-UX 11i OE, this command will update the OS and 11i OE
applications from the HP-UX 11i CDs:
Insert HP-UX 11i OE CD1and enter (as root):
Update the update-ux
/usr/sbin/update-ux -s /cdrom HPUX11i-OE
All new software from these OS, OE and network driver bundles are
installed:
HPUXBase32 or HPUXBase64
HPUXBaseAux
HWEnable11i
BUNDLE11i
FibrChanl-00 (64-bit OS only)
GigEther-00
RAID-00 (64-bit OS only)
FDDI-00 (32-bit OS only)
(other networked drivers if needed)
OnlineDiag
CDE-English (or appropriate language bundle(s) )
HPUX11i-OE
The system automatically reboots after the update.
/usr/sbin/update-ux -s /cdrom
New software from all OS and network driver bundles listed above are
installed, followed by an automatic reboot.
After updating an existing 11i system to the latest 11i release, use
swinstall to update hardware drivers from the new HWEnable11i
bundle. Insert either an HP-UX 11i OE CD1 or the latest Support Plus
CD in your local CD-ROM drive and enter (as root):
/usr/sbin/swinstall -x autoselect_patches=true \
-s /cdrom HWEnable11i
Chapter 2
Migrating to HP-UX 11i
Updating an Existing 11i System
61