HP -UX 11i Installation And Update Manual page 70

Table 2-1
Migrating to HP-UX 11i
Installing ServiceGuard Products
HP-UX 11i OS, OE and Driver Software on HP-UX 11i OE CDs
SD Bundle Name
These HP-UX 11i OS bundles are installed by default:
HPUXBase32 or
HPUXBase64
HPUXBaseAux
OnlineDiag
HWEnable11i
BUNDLE11i
CDE-xxx
FibrChanl-00
RAID-00
FDDI-00
GigEther-00
Appropriate base OS bundle and standard software above are installed by default
with each of these OE bundles:
HPUX11i-OE
HPUX11i-OE-Ent
HPUX11i-OE-MC
HPUX11i-TCOE
HPUX11i-MTOE
These network drivers are selectable when installing an OE:
100BaseT-00, 01
ATM-00, 01
FDDI-01, 02, 03
70
Description
HP-UX 11i Base OS installation, either 32- or 64-bit
OS software such as SD, SCR+DMI and parmgr
HP-UX 11i Support Tools
Support for new hardware
Required OS patches
Servers: CDE-English. Workstations: CDE-ALL
PCI FibreChannel adapter (64-bit OS only)
PCI RAID card, ver. B.11.11.01 (64-bit OS only)
FDDI PCI driver (32-bit OS only)
10/100/1000BaseT Ethernet
Internet environment for commercial servers
Enterprise environment for commercial servers
Mission Critical environment for commercial servers
Environment for technical workstations and servers
Minimal technical workstation environment
100BaseT (EISA, LAN) adapters, ver. B.11.11.00
(100BaseT-00 EISA is 32-bit OS only)
ATM drivers (PCI, HSC), ver. K.11.11
FDDI (HCS, HPPB, EISA) drivers, ver. B.11.11.00
Chapter 2