HP -UX 11i Installation And Update Manual page 57

Examples
Recommended
update!
swinstall(1M) manpage.
-x option = value Specifies swinstall options to be applied during the
update. For a typical update, no swinstall options are
required. swinstall -p (preview) is not supported.
For information on swinstall options, see the
swinstall(1m) manpage or the Software Distributor
Administration Guide.
sw_spec Specifies one or more optional software bundles to be
updated, such as an operating environment (OE)
bundle name, a network-driver bundle or Ignite-UX.
For more about update-ux, see the update-ux(1M) manpage.
Each of the following examples updates and reboots the system.
• Update to HP-UX 11i and an OE:
To update to HP-UX 11i and include an 11i Operating Environment,
you need to specify the Operating Environment bundle name in the
update-ux command. The OE bundles names are:
HPUX11i-OE
HPUX11i-OE-Ent
HPUX11i-OE-MC
HPUX11i-TCOE
HPUX11i-MTOE
For example, to update to 11i and install the default 11i OE, insert an
HP-UX 11i CD1 in the local drive mounted at /cdrom. As root, enter:
/usr/sbin/update-ux -s /cdrom HPUX11i-OE
Or, to update to 11i and install the 11i Mission Critical OE, insert
HP-UX 11i Mission Critical OE CD1 in the local drive mounted at
/cdrom and enter:
/usr/sbin/update-ux -s /cdrom HPUX11i-OE-MC
Each example updates the OS, installing all OS products listed on
page 51, plus the OE bundle. Application software products included
in the OE are represented by the bundle name. Any replaced product
bundles and unneeded patch information are removed. Applications
installed with each OE are listed at the back of the Read Before
Installing or Updating to HP-UX 11i booklet supplied with the CDs.
Chapter 2
Migrating to HP-UX 11i
Updating HP-UX 10.20/11.0 to 11i
57