HP -UX 11i Installation And Update Manual page 115

Step 12. Select:
Step 13. Reconnect the SCSI cable to the A5149A HBA's external connector.
NOTE
The following message appears:
Suspended ports to be resumed:
hardware_path
OK
The A5149A HBA is now online (Slot Power is ON) and the SCSI driver
resumes (State is active).
OLR of the adapter is complete.
Any SCSI error messages written to /var/adm/syslog.log do not affect
the result of the OLR process.
These restrictions affect the ability to perform online replacement (OLR)
and online addition (OLA) on the SCSI HBAs:
SCSI HBA
A4800A
A5149A (part number A5149-60001)
A5149A (part number A5149-60101)
A5150A (part number A5150-60001)
A5150A (part number A5150-60101)
A5159A
Notes:
1
Only if the replaced HBA was running with auto termination enabled.
2
Only if the PDC setting on the corresponding PCI slot has a usable initiator ID
setting. The speed will be set to the current PDC value (if any) or be defaulted
as shown in the previous table.
3
Must follow steps 1 through 15 of previous procedure.
Appendix B
In Case of Trouble
Problems Configuring HP-UX 11i
Restrictions
OLR
Yes
3
Yes
Yes
Yes
1
Yes
Yes
OLA
2
Yes
2
Yes
2
Yes
2
Yes
No
2
Yes
115