Verifying System Migration
Verifying HP-UX Installation
Then the Analysis process verifies that each required file is loaded
(existence and revision), all required dependencies are met, and runs any
available verification scripts for the product. This will take some time.
After the analysis you should see:
* Analysis succeeded.
If the analysis fails, either view /var/adm/sw/swagent.log to review the
analysis log or run the swjob... command listed at the end of the
swverify report sent to stdout.
For help with these commands, see the swlist(1M) and swverify(1M)
manpages and the Software Distributor Administration Guide.
Chapter 3
75