HP -UX 11i Installation And Update Manual page 95

Booting from the
primary path
ForthMode
IO
system
LS [<path>|flash]
OS [hpux|sppux]
PASSword
PAth [PRI|ALT|CON] [<path>]
PDT [CLEAR|DEBUG]
state
PIM_info [cpu#] [HPMC|TOC|LPMC] Display PIM of current or any
CPU
RESET [hard|debug]
RESTrict [ON|OFF]
to Forth mode
SCSI [INIT|RATE] [bus slot val] List/Set SCSI controller parms
SEArch [<path>]
SECure [ON|OFF]
TIme [cn:yr:mo:dy:hr:mn[:ss]]
clock
VErsion
Command:
To determine the boot path, enter:
pa
Primary boot path
Alternate boot path = 15/3
Console path
Keyboard path
If your boot device (CD) is mounted at the primary path, enter:
bo pri
Device : /pci@fe,90000/symbios@0,0/sd@4,0:cntl
Directory : LIF
File : HPUX
Arguments : hpux
Appendix A
Switch to the Forth OBP interface
List the I/O devices in the
List the boot or flash volume
Display/Select Operating System
Set the Forth password
Display or modify a path
Display/clear Non-Volatile PDT
Force a reset of the system
Display/Select restricted access
Search for boot devices
Display or set secure boot mode
Display or set the real-time
Display the firmware versions
= 1/0:0.4.0
= 15/1
= 15/1
Booting HP 9000 Systems
Booting V-Class Systems
95